Kitchen remodeling projects are often more complex than installing new cabinets and flooring. Much of the work of remodeling a kitchen requires the services of a professional plumber. Also, because building codes must be followed, these experts can make sure all regulations are met. Here are five services you may want your contractor to perform:

1. Remove and replace a garbage disposal

Inspecting the drain lines is a necessary part of this project. If a garbage disposal already exists, the plumber can remove it. This will provide access for an inspection before installing a new unit. Power will need to be turned off at the switch location and drain lines may need to be removed to be examined for signs of deterioration. If the drain lines are punctured or corroded, a leak can occur. Damage to drain lines can also prevent food and debris from flowing through the pipes.

2. Kitchen Sink Replacement

Plumbing modifications may be required when installing a new sink. A contractor will have the necessary parts and accessories for this job or will order them to order. A new casing may be required, as well as PVC piping, the correct trim washer, basket strainer, and gasket. In addition, a tail and a trap for the sink will be needed. For a double sink installation, the contractor will connect the two vessels using a piece known as a T-connector, which is attached to the tail under the sink.

3. Installing a new dishwasher

In some cases, installing a new dishwasher may involve some modification to existing hardware or accessories. For example, it will be necessary to remove any cabinets that cover the pipes. Plumbing lines may need to be re-routed. However, if a new sink is to be installed, complete this project before installing the dishwasher. If this is done, the existing sink plumbing can share the same line as the new dishwasher.

4. Upgrading from an electric stove to a gas stove

When converting electric stoves to gas stoves, some setup may be required. A licensed plumber is often qualified to install kitchen gas lines, and this is a task best left to the experts. The contractor should not begin the gas line installation process before performing a complete examination of the plumbing lines and fixtures. The professional will look for signs of corrosion or cracks in the casing. The installation project for new gas lines can be quite complicated and will leave no room for error. The plumber may also need to infiltrate the walls using an electric drill and installing carbon steel cable in the line to prevent a possible gas leak.

5. Installation of a new refrigeration unit

Adding a new refrigerator may require the expertise of a plumbing contractor. Cooling water lines may be required for newer model refrigerators that have ice makers and water filtration systems. Although it is not an extensive project, a professional will do the job correctly and use the most suitable accessories, such as the copper that connects to the water valve. If the cold water pipe is under the sink, this could mean drilling holes in the back of a cabinet to access it. In some cases, it may be necessary to drill through the floor, and this is not a task for someone inexperienced.